1.5″ Ball Probe Seat Bolt-on Monument – Black Hard Coat Anodized Aluminum – Single Bolt
These uncertified drift nests for 1.5″ SMR’s or reference spheres may be temporarily or permanently mounted to a variety of surfaces using M6 or 1/4″-20 socket head cap screws (not included). They may also be mounted using epoxy, hot glue, or other similar adhesives. The black, hard coat anodized finish provides added durability.
Related products
-
1.5″ Ball Probe Seat Monument – Stainless Steel – Bolt on – with Kinematic Seat
1.5″ Ball Probe Seat Monument – Stainless Steel – Bolt on – with Kinematic Seat
-
1.5″ Ball Probe Seat Bolt-on Monument – Red Non-Hard Coat Anodized Aluminum – Single Bolt
1.5″ Ball Probe Seat Bolt-on Monument – Red Non-Hard Coat Anodized Aluminum – Single Bolt
-
1.5″ Ball Probe Seat Monument With Back Side Magnets – Hard Coat Anodized Aluminum – Black
1.5″ Ball Probe Seat Monument With Back Side Magnets – Hard Coat Anodized Aluminum – Black
-
1.5″ Ball Probe Seat Bolt-on Monument – Blue Non-Hard Coat Anodized Aluminum
1.5″ Ball Probe Seat Bolt-on Monument – Blue Non-Hard Coat Anodized Aluminum
