1.5″ Ball Probe Seat Bolt-on Monument – Red Non-Hard Coat Anodized Aluminum – Single Bolt
These uncertified drift nests for 1.5″ SMR’s or reference spheres may be temporarily or permanently mounted to a variety of surfaces using M6 or 1/4″-20 socket head cap screws (not included). They may also be mounted using epoxy, hot glue, or other similar adhesives. The red anodized finish enhances their visibility and allows them to be easily spotted on your jobsite.
Related products
-
1.5″ Ball Probe Seat Monument With Back Side Magnets – Stainless Steel
1.5″ Ball Probe Seat Monument With Back Side Magnets – Stainless Steel
-
1.5″ Ball Probe Seat Bolt-on Monument – Black Hard Coat Anodized Aluminum – Single Bolt
1.5″ Ball Probe Seat Bolt-on Monument – Black Hard Coat Anodized Aluminum – Single Bolt
-
1.5″ Ball Probe Seat Monument – Hard Coat Aluminum – Black – Negative
1.5″ Ball Probe Seat Monument – Hard Coat Aluminum – Black – Negative
-
1.5″ Ball Probe Seat Bolt on Stainless Steel Monument with Stainless Steel Lid and Chain
1.5″ Ball Probe Seat Bolt on Stainless Steel Monument with Stainless Steel Lid and Chain
