1.5″ Ball Probe Seat Monument – Black Hard Coat Anodized Aluminum – Narrow Body
These uncertified drift nests for 1.5″ SMR’s or reference spheres may be temporarily or permanently mounted to a variety of surfaces using epoxy, hot glue, or other similar adhesives. The black, hard coat anodized finish provides added durability.
The narrow body design with 1″ OD offers a smaller footprint and allows SMR’s to be rotated below horizontal to provide a wider range of entry angles from the laser tracker into the SMR optic.
Related products
-
Bullseye Laser Tracker Tooling Kit – Standard Tooling for 1.5″ SMR’s
Bullseye Laser Tracker Tooling Kit – Standard Tooling for 1.5″ SMR’s
-
Mini Pin Monument For 0.25″ Pin (Stainless Steel) – 1″ OD
Mini Pin Monument For 0.25″ Pin (Stainless Steel) – 1″ OD
-
Probe Cone for 3MM Ball with 1/4 Pin – Zero Offset from surface and centered on pin
Probe Cone for 3MM Ball with 1/4 Pin – Zero Offset from surface and centered on pin
-
Bullseye Laser Tracker Tooling Kit – Standard for 0.5″ SMR’s
Bullseye Laser Tracker Tooling Kit – Standard for 0.5″ SMR’s
You may also like…
-
1.5″ SMR – Rhino Series Tough Probe
1.5″ SMR – Rhino Series Tough Probe
