1.5″ Ground Ball Probe Seat
1.5″ Ground Ball Probe Seats are typically permanently mounted in concrete floors or walls using epoxy or similar strong adhesives that harden once they’re dry. They’re intended to be mounted flush with the surface, which is cored out for installation. The nest includes an O-ring that seats snugly against the lid once it is screwed tight to prevent dirt, oil, moisture, or other debris from damaging the SMR seat.
Related products
-
Bullseye Laser Tracker Tooling Kit – Standard for 0.5″ SMR’s
Bullseye Laser Tracker Tooling Kit – Standard for 0.5″ SMR’s
-
Tooling Ball with Shoulder, 1/2″ Diameter, 1/2″ Offset, 1/4″ Pin with Internal #6-32 Thread – Steel
Tooling Ball with Shoulder, 1/2″ Diameter, 1/2″ Offset, 1/4″ Pin with Internal #6-32 Thread – Steel
-
Plastic Cap for 1.5″ Ball Probe Seat Bolt on Aluminum Monuments
Plastic Cap for 1.5″ Ball Probe Seat Bolt on Aluminum Monuments
-
Probe Cone for 3MM Ball with 1/4 Pin – Zero Offset from surface and centered on pin
Probe Cone for 3MM Ball with 1/4 Pin – Zero Offset from surface and centered on pin
